The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
Text excerpt from page 98 (click to view)
Optical Disc Bay
A CD-ROM or DVD-ROM drive can be installed in the optical disc bay. To remove a CD-ROM drive or DVD-ROM drive, complete the following steps: 1. Prepare the computer for disassembly (Page 5-3). 2. Remove the keyboard (Page 5-14). Note: For clarity, the keyboard is shown removed from the computer. The keyboard may be left attached to the system unit for this procedure. 3. Place the tabs on the keyboard in the slots provided in the top cover. 4. Remove the two retaining 1 screws. 5. Reach into the access opening 2 with a finger and push the drive toward the front of the computer. 6. Remove the optical disc bay drive.
Figure 5-20. Removing the Optical Bay Drive
To install a CD-ROM drive or DVD-ROM drive, reverse the procedure.