Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 8 (click to view)
Part 1 - INSTALLATION INSTRUCTIONS
1 - Drilling the shelves: a) Using the cardboard template provided, and taking hole �B� as a point of reference, drill the shelves along the central axis to allow the passage of the chimney. The chimney must be inserted into the shelves before it is fixed to the hood canopy C (fig. 12). b) When installing the ducting version with the air outlet directed upwards, if the ducting fan unit is
S07_14
S36_12
12
S36_13
positioned below the line of shelves it will be necessary to drill a suitable hole in the top shelf only, to allow the air ducting pipe to pass through (fig. 13). 2 - Direction and position of the ducting fan unit a) The hood is normally supplied with the air outlet directed towards the wall (fig. 3), if it is to be installed with the air outlet directed to the right or left (fig. 4a-b), it will be necessary to change the direction of the ducting fan unit, proceeding as follows: - Unscrew the screws U (fig. 14); - Turn the ducting fan unit 60° to the right or left; - Replace the screws U. b) The ducting fan unit air outlets must be arranged according to the type of installation to be carried out. · Air outlet directed upwards (fig. 2a-b). - Remove the plastic plug from the upper part of the venting grill and replace it on the rear part (fig. 15). · Air outlet directed towards the wall (fig. 3). - Remove the plastic frame from the air outlet (fig. 16).