Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
Text excerpt from page 6 (click to view)
Frost should be removed from the inside of the compartment with the special plastic scraper provided, whenever the thickness exceeds 4 mm. Do not use metal tools to remove frost so as to avoid seriously damaging the appliance. If a thick layer of ice is formed it will be necessary to carry out complete defrosting as following: 1. unplug the appliance from the mains socket or set knob (B) to position Â«OÂ». 2. wrap frozen food in several layers of newspaper and piace the food packages in a cool piace; 3. leave the door open. Insert the plastic scraper in the appropriate seating to act as an extension drain channel, piace a basin underneath to collect the defrost water; 4. when defrosting is completed, dry the interior thoroughly; 5. keep the scraper for future use; 6. plug the appliance back in; set switch (B) to position Â«IÂ»,. Set the appliance to fast-freeze operation. After three hours, move switch (F) to the Normal setting. Frequent opening of the doors encourages increased frost formation at the top of the appliance. To remove this excess frost, use the special plastic scraper provided.
Unplug the appliance before carrying out any maintenance operation.
During periods when the appliance is not used, you should take the following precautions: remove the plug from the wall socket; remove all food from the appliance; defrost and clean the interior and all accessories; leave the door slightly open, thus letting air circuiate and preventing the formation of mould and unpleasant smells.
Never use metal object for clearing your appliance as it may get damaged. Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.