Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 11 (click to view)
AUTOMATIC TIMER CONTROL
The automatic timer can be used with the oven only.
TO SWITCH THE OVEN ON AND OFF AUTOMATICALLY
1. Ensure the clock is showing the correct time of day. 2. Place food in the oven. 3. Set the length of time you want the food to cook for by pressing and releasing the button and then pressing the button until the correct cooking time is displayed. This must be completed within 5 seconds of pressing the button. The maximum cooking time is 23 hours 59 minutes. The Cookpot and Auto symbols will show in the display. Our diagram shows the cooking time set for 2 hours 30 minutes. After a few seconds the time of day shows in the display. 4. To set the time you want the food to be cooked by, press and release the button. This will show you the earliest possible stop time. If this is different to the time you want the food to be cooked by, press the button within 5 seconds until the correct stop time shows in the display. Our diagram shows the food is to be cooked by 18.00 (6pm). After a few seconds the time of day shows in the display and the Cookpot symbol goes out. The 'Stop' time must not be more than 23 hours 59 minutes from the time of day. For example, if the time of day is 09.00 hours (9.00am) the latest 'Stop' time will be 08.59 (8.59am) the next day. 5. Turn the oven control to mark 9 then to the required setting. The clock will work out what time the oven will switch itself on and will switch the oven off at the end. An audible signal will sound when cooking is complete. To cancel the alarm, see below.