Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
Text excerpt from page 12 (click to view)
Installation
Mounting accessories included
1 Coupling ring 8 metal screws 2,9 x 16 (if the hood is used in the extractor version) or the top of the cabinet (if the hood is used the hood in the recirculation version). � Remove the frame by pushing the two side � release keys (5-6). Fix the coupling ring on the exhaust hole of the hood and make connection with the bottom end of the hose (7a-b), seal with tape. Attention: The hose is not supplied and must be purchased separately. Prepare the electrical connection (8). Fit the hood into the opening and fix securely to the cabinet with 8 screws (9). Fit the frame (10 - snap into place).
5
Fixing the hood into a cabinet
This cooker hood is designed to be fitted to a cabinet or similar support. � Create an opening in the bottom of the cabinet to insert the cooker hood (1-2). � Make a hole on the top of the cabinet to fit the hose and for the electrical cable (3). � Fit a hose (4) long enough to reach the outside
2