The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 11 (click to view)
EMS 2185
UK
Before using your microwave oven for the first time
Cleaning
Wipe over the front of the appliance with a damp cloth. Do not use abrasive cleaning agents (these can damage the surface). For stainless steel fronts use a suitable stainless steel cleaning agent that leaves a protective film against fingerprints. Before you first use the appliance, remove all the accessories (including the turntable and turntable support) from the cooking area. Wash the accessories in warm water and washing up liquid. Wipe the cooking space with a soft, damp cloth.
Setting the clock
Plug the appliance into the mains. The display starts to flash "00:00" The dots between the digits will flash rapidly. Example: To set 12:15: Set the time of day with the Timer knob. The dots between the digits flash slowly.
Confirm by pressing either the Start-button or the Clear button. The time of the day is displayed.
12:15
The appliance is now ready for use.
i
To reset the time of day, once the microwave is operational; Press and hold the Clear key for 5 seconds, the dots between the digits will flash rapidly. Set the time of day with the Timer knob and press the Clear or Start key to confirm. The dots between the digits stop flashing. The time of day has been reset.