Thr Video Recorder i have is quiet Old and the Producer could Not help me. So i w as very glad to find an offer for the owners Manual for a very fair Price.a I obtained the original Manual very quick and I am happy to have it now.
The PDF copy was immediately available on download after the payment. However, I noticed that the document was in German, and Ihad to contact a German translator to get it translated it to English. The quality of document is legible can be used for my purpose.
The manual was complete and of great quality. Originally a tri-lingual file, I first received only one language. After a note to owners-manuals.com, I quickly received the remaining languages... Great service, definitely worth it.
Thank you for providing this manual and at low cost.
The Philips scope is of excellent quality, longevity and build and had a couple of faults
when it was passed to me. Having the CCT diagrams is a blessing.
I have fixed the problems and also modded the scope to my requirements.
I have built a 24v Li-Ion pack for portable use from old but good laptop batts.
it is working beautifully and I am well pleased. Keep up the good work Guys.
Text excerpt from page 30 (click to view)
Oven Door Glass
The oven door is fitted with two glass panels mounted one behind the other. The inner panel can be removed for cleaning.
Caution: the following steps must be performed only with the oven door removed! If the glass is removed while the door is attached, the lighter weight may cause it to spring up and cause injury. Important! Rough handling of the glass, especially at the edges of the front panel, may cause it to break. Removing the glass from the door 1.Detach the door and, with the handle downwards, place it on a soft, even surface. 2.Grasp the top glass panel underneath, and push it towards the door handle against the pressure spring, until it comes free. 3.Hold the panel gently underneath, and slide it out. Clean the glass panel Inserting the glass to the door 1.Insert the panel at an angle from above into the section of the door in which the handle is located. 2.Lower the panel. Place the glass against the pressure spring at the handle end, and in front of the retaining frame at the bottom of the door, then push it into the frame. The glass panel must be firmly attached! Re-hang the door to the oven.