I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 13 (click to view)
OPERATING INSTRUCTIONS
Before first use
Initial Cleaning
Before you use the oven for the first time, you should clean it thoroughly. You can switch on the oven lighting to make cleaning easier. 1. Turn the oven function switch to oven lighting . 2. Remove all accessories and the side rails, and wash with warm water and washing up liquid. 3. Also wipe out the oven with warm water and washing up liquid, and dry. 4. Clean the front of the appliance with a damp cloth only.
i
Tip: In the case of stainless steel fronts, use commercially available stainless steel cleaners that also form a protective film against finger marks. Important: Do not use any caustic or abrasive cleaners! The surface could be damaged.
!
Setting the clock
Tip: The oven will not function until the clock is set. The clock must be set before the oven is used and whenever power has been disconnected to the appliance. If the clock needs to be set, you will see �0.00� flashing in the display.
Use �+� and �-� to set the right time. After around 3 seconds, the new time will be accepted and the display will stop blinking.