IBANEZ EQA-PZ
Owner's Manual

EQ Controls The EQA-PZ system has separate EQ circuits for both the Magnetic Pickup and the Piezo Pickup. The Magnetic EQ Circuit boosts both the bass and treble frequencies simultaneously with a single control knob. The Piezo Pickup EQ Circuit is a 2-band EQ circuit and features a Treble EQ knob on the body and a Bass EQ trim pot inside the control cavity. The Bass EQ trim pot is designed for "set and forget" use. Turning the trim clockwise boosts the bass frequencies. Turning the trim Magnetic Volume counterclockwise cuts the bass frequencies. Piezo Volume
Piezo Treble Boost/Cut Magnetic EQ

INSTRUCTION MANUAL

MONO-RAIL II w/Fishman® Piezo
Mono-Rail II w/Fishman® Piezo bridges allow the bass strings to be isolated fro one another by using independent bridge plates for each string. the strings are installed by lowering the ball end into the bridge and hooking the ball end below the string catch at the rear of the bridge. (A) Intonation adjustments can be made by adjusting the intonation screws (A) at the rear of the bridge clockwise to move the saddle back, and counter clockwise to move the saddle forward.

This is to certify that the aforementioned equipments fully conform to protection requirements of the following EC council directives. DIRECTIVES : 89/336/EEC Electromagnetic compatibility Printed in KOREA JAN01393 ©Copyright 2001

Ibanez EDA Bass