Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
The manuel was exactly what I needed and I received it promptly. Thanks
Text excerpt from page 5 (click to view)
Changing the Opening Direction of the Door
Unplug the freezer before performing the following operations: Remove the ventilation grill (D-Fig. 2). Remove the lower hinge (E-Fig. 2) by loosening the two fastening screws.
Take off the handle cover (see Fig. 3a). Remove the handle and reï¬》 it on the opposite side.
E F G F
The holes that are not used are to be masked with the plastic plugs removed. If, after having reversed the door, it is not in line with the unit, the top hinge can be adjusted. To do this, use a 10 mm spanner as shown in Figure 3; slacken the nut, align the door by pushing it to the left or right, then re-tighten the nut. Attention After completion of the door reversibility operation, verify that the door gasket is adherent to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not ï¬》 perfectly to the cabinet. In that case, wait for the natural ï¬》ting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Remove the door by sliding it out of the upper pin (AFig. 3). Unscrew the pin and the washer (A+B-Fig. 3) and reï¬》 them on the opposite side.
C B A
Reversing the Quick-freezing Compartment Door (Fig. 4)
Unscrew the closing prong support (A).
Unscrew the two hinges (B) and remove the door. Turn the closing prong support and ï¬』 it to the other side of the Quick-freezing compartment. Reverse the door and the hinges and mount them on the other side of the compartment. Check to see that the door closes correctly.
Reï¬》 the door. Reï¬》 the lower hinge (E-Fig. 2) on the opposite side by means of the two screws that have been previously removed. Remove the plastic plug (F-Fig. 2) from the ventilation grill (D) pushing it as shown by the arrow. Fit the plastic plug (G) supplied with the appliance, in the seat left free on the opposite side. Reï¬》 the ventilation grill.