It was a complete manual as stated. Very good source for older product manuals. Thanks
Text excerpt from page 16 (click to view)
5 Select the required option
Select the HALF LOAD option if required.
6 Select the temperature
Turn the selector dial to the required temperature setting.
7 Select the programme and start it
Turn the programme selector dial clockwise to the required wash programme and press the start/stop button: the operating light and the door locked light come on and the machine starts to operate.
8 At the end of the programme
The machine stops automatically. It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release. The door cannot be opened until the door locked light on the control panel goes out. Press the start/stop button again and the operating pilot light goes out. Remove the laundry. Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. Release any buttons which have been pressed. Turn the water tap off and unplug the machine. Leave the door ajar to air the machine.