Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 20 (click to view)
Something not working?
Problems which you can resolve yourself.
â¢ The machine does not start up:
â¢ The door is not firmly closed. â¢ The machine is not plugged in or there is no power at the socket. â¢ The main fuse or the fuse in plug has blown. â¢ The programme selector dial is not positioned correctly and the ON/OFF button has not been depressed.
â¢ The machine does not fill:
â¢ The water tap is closed. â¢ The inlet hose is squashed or kinked. â¢ The filter in the inlet hose is blocked. â¢ The door is not properly closed.
â¢ The machine fills then empties immediately: â¢ The machine does not empty and/or does not spin:
â¢ The end of the drain hose is too low. Refer to relevant paragraph in âwater drainageâ section. â¢ The drain hose is squashed or kinked. â¢ A programme which ends with the water left in the tub has been selected. â¢ The drain filter is clogged.
â¢ There is water on the floor:
â¢ Too much detergent or unsuitable detergent (creates too much foam) has been used. â¢ Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. â¢ The drain hose is damaged. â¢ The drain pump has not been properly screwed on after cleaning. â¢ The cap on the emergency emptying hose has not been replaced after cleaning the pump.
â¢ Unsatisfactory washing results:
â¢ Too little detergent or unsuitable detergent has been used. â¢ Stubborn stains have not been treated prior to washing. â¢ The correct temperature was not selected. â¢ Excessive laundry load.
â¢ The machine vibrates or is noisy:
â¢ The transit bolts and packing have not been removed. â¢ The support feet have not been adjusted. â¢ The laundry is not evenly distributed in the drum. â¢ Maybe there is very little laundry in the drum.
â¢ The door will not open:
â¢ The programme is still running. â¢ The door lock has not been released. â¢ There is water in the drum. 20