Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Hr, klasse , good manual, verry fast on my e-mail, very usefull manual. rgds; ahm zeegers
Text excerpt from page 11 (click to view)
Caratteristiche tecniche
Bruciatore forno a gas GPL Gas città / Gas naturale Elemento riscaldante Grill Lampada forno Ventilatore raffreddamento Motore girarrosto Potenza totale massima Tensione di alimentazione (50Hz) Categoria Taratura 2500 W 2700 W 1750 W 25 W 25 W 4W 1800 W 230 V III1a2H3+ Gas metano G 20 / 20 mbar larghezza profondità altezza
Dimensioni minime del vano
sottotavolo: a colonna: 59,1 cm 58,0 cm 56,0 cm 55,0 cm
d'incasso
Dimensioni utili cavità del forno
altezza larghezza profondità volume utile 32,5 cm 42,5 cm 40,0 cm 55 l.
Installazione
L�installazione dell�apparecchiatura ed il collegamento alla rete elettrica devono essere eseguiti solamente da PERSONALE QUALIFICATO.
L'incasso nei mobili componibili
Per il buon funzionamento dell�apparecchiatura inserita in un mobile componibile è necessario che quest�ultimo abbia le caratteristiche adatte. In conformità alle norme di sicurezza, la protezione contro eventuali contatti con le parti elettriche e parti protette con solo isolamento funzionale deve essere assicurata mediante una corretta operazione di incasso dell�apparecchiatura. Tutte le parti che assicurano la protezione, anche un eventuale pannello di copertura (per esempio se l�apparecchiatura viene posizionata alla fine o all�inizio dei componibili), debbono essere fissate in modo tale da non poter essere tolte senza l�aiuto di qualche utensile.
FO 1139
Fig. 10 - DIMENSIONI DI INGOMBRO DEL FORNO
550
Inserimento in colonna
Il vano del mobile dovrà avere le dimensioni riportate in fig. 11.
Inserimento sottotavolo
Per l'inserimento sottotavolo in un mobile senza piedini, fare riferimento alla figura 12. Per l'inserimento sottotavolo in un mobile con piedini, fare riferimento alla figura 13.
580
0 44
min
Fissaggio al mobile
Inserite l�apparecchiatura nel vano. Aprite la porta del forno e fissate il corpo forno al mobile con quattro viti per legno che ben si adattino ai fori appositamente realizzati sulla cornice perimetrale (Fig.14). Nei casi in cui si effettui anche l�inserimento di un piano di cottura con piastre elettriche, l�allacciamento elettrico del piano e quello del forno devono essere realizzati separatamente, sia per ragioni elettriche, che per facilitare una eventuale estrazione dal mobile del forno. Eventuali prolunghe dovranno essere realizzate con cavi in grado di sopportare la potenza prevista.
560 -57 0
110
FO 0290
Fig. 11 - INSERIMENTO IN COLONNA Le quote sono espresse in millimetri