Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 31 (click to view)
8. Loosely screw in fixing plates from below on the worktop and on the connecting cross bar.
9. Place Frontline strips on the appliances. Check that the Frontline strips are in line with one another.
10. Tighten the fixing plate screws. 11. Inject a line of silicon into the gap between the appliances. 12. Dampen silicon line with a little soapy water. 13. Press rubber block hard against the glass ceramic and draw it slowly along the gap.