IF SOMETHING DOESN'T WORK ?
Problems The wash results are not as usual Solutions Check that : was the wrong quantity or the wrong detergent added ? Insufficient detergent leads to grey washes and scale deposits in the machine. Check the quantities more exactly. were special stains pre-treated ? were programme and temperature correctly chosen ? Check that : the water pression is sufficient. the pump filter is not obstructed. there has not been a power breakdown. Check that : the water pression is sufficient. the pump filter is not obstructed. the mains fuse is intact. there is not a rinse hold ending a washing programme (see the programmes chart page 12). Check that : the mains fuse is intact. the appliance is plugged in,. the lid is firmly shut. the programme selector dial is correctly positioned. the beginning of the programme has been ordered (on/off pushbutton pushed on). there has not been a power breakdown. Check that : the drain hose is not squashed or bent. the drain filter is not clogged. Check that : the inlet water hose is opened and the water pression is sufficent. the lid of the appliance is closed. there has not been a breakwater. Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secrured. the machine does not touch something. the load is sufficent. Check that : the end of the drain hose is not too low. Check that : there is not too much detergent or unsuitable detergent. The formation of foam can cause water leaks. one of the detergent dispenser is not obstructed. the drain hose is well hanged. if one of the joints or the tap leaking ? it is not always easy to see as the leak often runs along the hose. is the drain filter cover properly closed ? Check that : you have respected the adviced quantities. check that the siphons located at the back of the detergent dispenser are not obstructed. 16