Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Text excerpt from page 33 (click to view)
â¢ When using modular washing powders the individual components were not used in the correct ratio. If there are still grey stains on the washing â¢ Washing soiled with ointments, grease or oils was washed with insufficient washing powder. â¢ The temperature selected for the wash was too low. â¢ A frequent cause is that fabric softener especially a concentrated one has come into contact with the washing. Wash out these types of stains as fast as possible and use the fabric softener carefully. If after the final rinse foam is still visible â¢ Modern washing powders can still cause foam in the final rinse cycle. The washing is nevertheless sufficiently rinsed. If there are white residues on the washing â¢ These are insoluble contents of modern washing powders. They are not the result of an insufficient rinse. Shake out the washing or brush it off. Perhaps you should turn the washing inside out in future before washing it. Review your choice of powder, possibly use liquid detergents in future.
Executing an emergency emptying
1 Warning! Switch off the washing machine before the emergency emptying! If the washing machine no longer pumps out the washing suds an emergency emptying must be carried out. Caution! The washing suds, which flow out of the emergency emptying hose can be hot. Risk of scalding! First allow the suds to cool down before an emergency emptying! 0 Put down a flat container to catch the suds draining out. 0 Pull down the flap in the left corner of the base strip and remove it.