This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 14 (click to view)
How to wash
How to wash
Selection of the DELAY START option
To delay starting of a programme, press the DELAY DELAY START button before starting the START machine. The figures corresponding to the selected delay will be displayed for about 2 seconds, after which the duration of the selected programme will appear on the display. When the START/PAUSE button is pressed, the selected delay will again appear on the display and the machine starts its countdown.
At the end of the programme
The machine stops automatically and three flashing zeros are displayed. The END and spin speed pilot lights, as well as the pilot light(s) corresponding to the selected option(s), stay on. If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out before opening the door. The pilot light of the START button flashes and tree flashing zeros are displayed. Release of the lock is indicated by an audible signal. Switch the machine off by pressing the ON/OFF button. Turn the programme selector dial to RESET. Remove the laundry from the drum. Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items. Close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Starting the programme
To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing. The pilot light corresponding to the wash phase which is running comes on. After about 30 seconds the programme starts.
START PAUSE
