Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 7 (click to view)
MASTER SECTION DESCRIPTION
MASTER SECTION DESCRIPTION
6 DIGITAL DELAY The signal from the input channels, processed by the built-in digital delay will feed to the master output. There are three knobs here to control the effect of digital delay. LEVEL This knob adjusts the mix level of the effect sound. TIME This knob adjusts the internal time of the delays; turn to the right to increase the interval time between two delays. REPEAT To increase the rate of the delays, turn this knob to the right. You will hear the signal repeat at a faster rate.
7 TAPE IN CONTROL This knob adjusts the level of signal from the Tape In to the Main bus.
8 MASTER CONTROL This adjusts the final level of the Main bus. It controls the Main bus signal which is output to the speakers.
9 TAPE IN AND REC OUT The TAPE IN sockets allow cassette recorders or CD players to be added to the Main output. The RECORD OUTPUT, with RCA phono sockets, provides signal output to a cassette deck and home audio equipment. The nominal output level and impedance are -10dBV/600ohms.
