This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 16 (click to view)
The oven
4 After cleaning (use a window-cleaning product), slot the the door front back into the bracket (SEE
If the glass is very soiled, use the scraper supplied with the cooker. Make sure the door is properly secured on both sides. 5 Press the two springs on the top edge of the door and press the door front into place. 6 Remove the oven cloths.
PICTURE).
To change the oven light bulb
1 Turn all controls to off and check that the oven 2 3 4 5
is not hot. Unscrew the glass cover (see illustration). Unscrew the old bulb. Fit a new bulb, marked 230�240 V, 15 W and 300°C, with an E14 screw fitting. Refit the glass cover.
The oven accessories
Release each side rack for the oven shelves at the bottom corners (1), lift it sideways and upwards and remove from the oven (2). Wash the racks and shelves by hand or in a dishwasher. If very soiled, soak them first, before cleaning with a steelwool pad. The baking trays and oven dish should be wiped clean with paper towels, or washed by hand when necessary. Any burnt-on food can be removed using a suitable spatula.
2
1
Storage drawer
1 Empty the drawer and pull it out as far as possible. 2 Hold the handle and lift upwards gently. This
frees the drawer from the catch at the back. 3 Pull the drawer out completely and lift it out. After cleaning, place the drawer wheels on the brackets (SEE PICTURE). Lift the drawer slightly as you first push it in so as to prevent the wheels from fastening in the front catch.