5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Text excerpt from page 3 (click to view)
4. USING
4.1. The control panel
1 - On/Off pushbutton 2 - Half load pushbutton 3 - Rinse hold pushbutton Represented model : T 1035 V 4 - Spinning speed variator 5 - Program selector 6 - Temperature selector
123
4
5
6
4.2. How to do a wash ?
Before the first wash in your washing machine, we recommend that you should do a preliminary wash at 90°C with detergent but without any washing to clean the tub.
The knob indicates the possible spinnings on the coton programmes. These spinnings are reduced for the synthetics, wool and delicate cycles.
4.2.4. Choice of the temperature
Choose the wash temperature applicable for the selected programme (using the information given in the programmes table) and comply with the temperature shown on the care label for each article to be washed (see the washing guide).
4.2.1. Loading the washing
� � � Lift the machine cover. Open the drum by pressing on the locking button A; the two flaps automatically separate. Insert the washing, close the drum and the cover of your washing machine.
4.2.5. Choice of the pushbuttons
Press the chosen pushbuttons.
Warning : before you close the cover of your washing machine, make sure that the drum door is properly closed:
4.2.5.1. «Half load» pushbutton
This pushbutton allows to wash small quantity of linen not much soiled (max. 2,5 kg) on cotton programmes only by reducing the water quantity during rinsings.
A
�the two flaps latched together, �the locking button A extended.
4.2.5.2. «Rinse hold» pushbutton 4.2.2. Proportioning of detergents
Your washing machine was designed to reduce water and detergent consumption, therefore reduce the doses recommended by detergent manufacturers. Pour the powder detergent dose into the wash compartment and into the prewash compartment if you chose the «prewash» option. Pour in the softener into the compartment if you wish. If you are using a different type of detergent, refer to the «detergents and additives» section in the washing guide. If you use this pushbutton, the tub remains full of water at the end of the last rinse to prevent the washing from becoming creased if it is not taken out of the drum as soon as the washing machine is stopped.
4.2.6. Choice of the programme
Select the programme depending on the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme.
4.2.3. Choice of the spinning speed
Choose the spinning speed which corresponds to the nature of your laundry and to the degree of humidity wished at the end of the wash. 3
4.2.7. Starting the programme
After you choose the washing programme, press the «On/ Off» pushbutton to start the cycle.
