Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
Text excerpt from page 10 (click to view)
Before starting up for the first time it is advisable lo load a few moist cloths into the dryer and to let it run for about 20 minutes. This ensures that no dust and dirt is left in the drum.
1. Connect the appliance. 2. Load the laundry. 3. Close the door. 4. Select the desired drying time (in high or low temperature section, depending on the laundry). 5. In case, press button .
6. Press button
: the programme starts.
If the position on the dial is reached, the heating is automatically cut off and the laundry is cooled. After around 10 minutes, the programme is over. Important: It is not advisable to open the door during operation to check the degree of dryness. As the laundry is warm, when touched it gives the impression of still being damp, even if it is dry. Open the door after the programme has finished. If the programme has to be interrupted, it is advisable to perform the cooling phase to prevent the heat from building up inside the machine.
Switch off the appliance. Clean the filter and empty water container (see pages 11 and 12).