Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 4 (click to view)
Operation
Before use
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Freezer controls
1 2 3 6 4 5
S
�
� Fast freeze switch � Fast freeze light (yellow) � Mains-on light (green) Starting your appliance
Insert the plug into the wall socket. The pilot light will light up to show that the appliance is on.
���
�
� Warning light (red) � Thermostat control
Warning light (red) �
If the temperature warning light � lights up, it indicates that the temperature within the freezer has reached a level where safe food storage is no longer ensured. When the freezer is first switched on, the warning light will stay on until the temperature has dropped to a safe level for the storage of frozen food.
Temperature control
The temperature inside the freezer is regulated by a thermostat with 6 temperature positions and one �OFF� (O) position. Position 1 = minimum cold Position 6 = maximum cold Turn the thermostat dial to the required position. An intermediate position is usually the most suitable, although the temperature will be affected by: ¥ Room temperature ¥ How often the door is opened ¥ How much food is stored ¥ Position of the appliance In determining the correct temperature control setting all these factors have to be considered and some experimentation may be necessary. To obtain a colder temperature, turn the thermostat control to the higher numbers; to obtain a warmer temperature turn the control to the lower numbers. When altering the temperature setting, allow 24 hours for the temperature to stablise before making further changes. For easier turning of this control, use a small coin.
Freezing fresh food
In any 24 hour period you can freeze up to 12 kg of fresh food. Activate fast freeze by sliding the fast freeze switch � to the left (fast freeze position) 24 hours before you want to freeze your fresh food, the yellow light � illuminates. This time can be shortened depending on the quantity of food to be frozen. After the time has elapsed place the food to be frozen in the top compartment of the freezer as this is the coldest part. In the top compartment, products must only be stacked up to the mark on the cabinet wall so as to ensure that air circulation is not obstructed. Once the food is completely frozen (which could take up to 24 hours) return the fast freeze switch to the �OFF� position; the yellow light � goes off. Distribute the frozen food packages in the other compartments, so that the top compartment can be used for a further freezing operation.
