This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 33 (click to view)
Setting the hob for the new gas type
1. If necessary, activate the hob by touching the main ON/OFF Control for about 3 seconds.
2. Touch the Timer Control repeatedly to select the auxiliary burner (front left burner) on the burner selection display .
3. Touch the Increasing Control and hold the finger on it until the value 99 appears on the time display. Then, touch the Decrasing Control and hold the finger on it until the value 80 is displayed.
4. Then, touch the Increasing Control until 83 is displayed. At this point, the hob is set to the �Gas Change� mode and the current gas setting appears on the display: - n0 stands for gas G20 (20 mbar) - n1 for gas G30 (28-30/37 mbar). IMPORTANT: setting n2 does not allow the hob to function. 33