perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 9 (click to view)
Once the top of the panel has been correctly positioned, ï¬』 it through the holes in the bottom bracket, without tightening the screws (Fig. 10). Fig. 10
Once the door has ben correctly aligned, tighten the holding nuts on the ï¬』ing brackets and attach the appliance to the adjacent units and the bottom of the work surface (Fig. 12). Fig. 12
Check the position again by slackening the screws and pins then, once the best position has been obtained, fully tighten all the ï¬』ings. Cover the visible part of the top bracket on the panel with plastic cover (D), inserting it in the locations provided in the bracket. Fig. 11
If the appliance has been ï¬》ted into a space 820 mm high and the maximum height of the base plate is 100 mm, ï¬》 the front cover plate by pushing the two vertical lugs into the rectangular holes on the bottom side of the ventilation duct until they click. The plate can be adjusted backwards or forwards in the holes (Fig. 13). Fig. 13