This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Text excerpt from page 12 (click to view)
The relevant light will light up.
95°C 60°C 50°C 40°C 30°C
If you wish the laundry to undergo an extra rinse, select the �Super Rinse� option. If your laundry is lightly or normally soiled and it is necessary to prolong the washing time, select the �40° AA� option. The relevant light illuminates.
Temp.
Super Rinse 40° AA
7. Select the spin speed or the Rinse Hold option
Press the �Spin� button repeatedly, in order to select the desired spin speed or the Rinse Hold option. The relevant light will light up. If you select the Rinse Hold option, the machine will stop at the end of the programme with the water still in the tub.
1600 1200 900 700 Rinse Hold
10. Select the �Delay�
Before you start the programme, if you wish the start to be delayed, press the �Delay� button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 23 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.
Spin
Delay
8. Select the desired options
If your laundry is heavily soiled, it may be advisable to select the �Prewash�option. If is heavily soiled and you wish to prolong the washing time, select the �Intensive� option. If your laundry is only slightly soiled, select the �Extra Quick� option. The relevant light illuminates.
11. Start the programme
Press the �Start/Pause� button. The relevant light will stop flashing and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay.
Prewash Intensive Extra Quick
12. How to change an option or a programme during its cycle
Before you make any change, you must pause the machine by pressing the �Start/Pause� button.