|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was impressed with the quality of service (frequent e-mails to let you know the status of your order), and the speed at which the download became available. The manual was a life saver and was not easy to track down. Thank you for such an excellent service.
;
the manual was just what i wanted it had all the revelent information required to operate the hifi .Iwould use any manual i downloaded for any item which needs a manual
;
Die gewünschte Bedienungsanleitung wurde vereinbarungsgemäß in deutsch bereitgestellt. Sie ist gut lesbar. Kein Kauderwelsch.
Danke für den Service.
;
GOOD SERVICE MANUAL GOT ALL THE INFO. THAT I NEEDED..
;
Excellent product and service. I bought a second-hand Casio CPS-60 keyboard which had no manual. Packed full of features which I had no idea how to operate . . .
Google search found this site (and others with the same manual for sale for $8.99!)
I bought the manual and within an hour the download was available. Quality of the scanned images is good - very clear - and the PDF has been created with the pages in the correct order.
I would definitely use this site again.
CONTROLS & OPERATION 2
Sleeve Tip
Tip
Sleeve
Tip
Ring
TIP = High (+) Sleeve SLEEVE = GND (-)
Cable Wiring Diagram for Tuner/Amp Output Phone Plug
2.2.3 EFFECTS LOOP The Effects Loop jack is designed for use with outboard effects such as compressors, delay units, or reverbs. A �Y� cord with one TRS 1�4�� connector to two 1�4� TS is required to use this function. This Effects Loop output jack can also be used to supply the audio feed for a sound card. Most computer sound cards are provided with a 1/8� (3.5mm) female stereo audio input jack. The ACOUSTI-Q�s signal can be sent to this connection by inserting a 1�4� (TS) plug into the Effects Loop. The Main (XLR) output is defeated if the 1�4� jack is fully inserted. To send a signal to both input channels of the sound card requires the 1/8� stereo plug to have the tip and ring connected to one another.
Sleeve Ring Tip Tip Sleeve
Ring
TIP = Output (Send) RING = Input (Return) SLEEVE = GND
Cable Wiring Diagram for Effects Loop Output TRS Plug
If the Main output of the ACOUSTI-Q is to be used to feed a computer�s sound card, this can be done by using a cable with a female XLR connector to a 1/8� (3.5mm) stereo plug. The correct wiring for this cable is � the shielding from Pin 1 (GND) of the XLR is connected to the sleeve connection of the 1/8� stereo plug, the wire from Pin 2 of the XLR is connected to the tip of the 1/8� plug and the wire from Pin 3 of the XLR is lifted (not connected). The mono output of the ACOUSTI-Q will now be available to the left channel of the computer�s sound card.
11
|
|
|
> |
|
