|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
;
The purchased manual is an high-quality scan of the original JVC paper-based Owner´s Manual. I am very satisfied!
;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
three. Operation
Mode Off On Standby Procedure Receiver/amplifier off Receiver/amplifier on and playing program material Simply turn off your receiver/amplifier. The subwoofer will turn off after approximately five minutes. The subwoofer will turn on when your receiver/amplifier begins playing again. LED Status Red Green Red
Volume
Crossover Frequency
The crossover frequency knob determines the highest frequency your subwoofer will reproduce. It allows a seamless transition from the subwoofer to the satellite speakers. Experiment with this adjustment to find the crossover frequency that sounds best with your speakers. When using the speaker-level connections, the crossover adjustment will also limit the low frequencies being sent to your satellite speakers. This means that your satellites won�t have to try and reproduce the information the subwoofer is playing.
Troubleshooting
If you used the high-level (speaker) inputs and there is no sound from any of the speakers, check the following: � Receiver/amplifier is on and a source is playing. � Powered subwoofer is plugged in. � Check all wires and connections between receiver/ amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires is frayed, cut, or punctured. � Review proper operation of your receiver/amplifier. If there is low bass output, check the following: � Make sure the connections to the left and right �Speaker Inputs� have the correct polarity (+ and �). � Make sure that the subwoofer is plugged into an active electrical outlet. � Powered subwoofer is plugged in. � Adjust the crossover point. If you used the line-level inputs and there is no sound from the subwoofer, check the following: � Receiver/amplifier is on and a source is playing. � Powered subwoofer is plugged in. � Check all wires and connections between receiver/ amplifier and subwoofer. Make sure all wires are connected. Make sure none of the wires is frayed, cut, or punctured. � Review proper operation of your receiver/amplifier.
|
|
|
> |
|
