|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Once again owner-manual.com has saved the day for me, and come through with the manual I need. I looked other places too, and couldn't find it anywhere. Thank You owner-manual.com!!! You're the BEST!
;
very good quality that can be magnified several times, and it remains readable.
For sure I will return next time the need for a service manual arise.
;
The service manual is really great - thanks to it I was able to install the laser unit and thus "save" my CD-player, which seemed to be impossible before I had the manual.
;
Downloaded the Service manual OK of the Technics Piano and have now repaired it and its going fine. Excellant; thank you for the fine servce. A.M
 ;
This site is working fine! Did buy a manual for SX-EX25L and after a while I could download it and fix the problem. Nice and easy!
[6] VIDEO 3 P.C.BOARD(b) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CW 403,6P) from connector(CN 501) on the Input P.C.Board (m). 4. Remove 2 screws(J) and then remove the Video 3 P.C.Board(b). 5. Pull out the Shield-video(8). [7] TONE P.C.BOARD(c) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CN 710,10P) from connector(CN 803) on the Pre out P.C. Board(l). 4. Pull out the Balance-knob(5). 5. Remove 4 screws(J) and then remove the Tone P.C.Board ASS'y(AC). 6. Remove 4 hexagon nut(2) and then remove the Shield-balance(9). [8] PHONES P.C.BOARD(e) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CN 709,5P) from connector(CN 1) on the Amp P.C.Board(i). 4. Disconnect the lead wire(CN 708,6P) from connector(CN 35) on the Main P.C.Board (j). 5. Remove 2 screws(E) and then remove the Phones P.C.Board(e). [9] POWER P.C.BOARD(f) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CN 705,5P) from connector(CN 404) on the Front P.C.Board (h). 4. Remove 2 screws(J) and then remove the Power P.C.Board(f). [10] STANDBY P.C.BOARD(g) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Remove 2 screws(J) and then remove the Standby P.C.Board(g). [11] TUNER P.C.BOARD(k) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove 1 screw(I) of Chassis-bottom and then Shield-tuner(41). 3. Remove 28 screws(G,K) and then remove the Chassis-back(32). 4. Pull out the Tuner P.C.Board(k). [12] PRE OUT P.C.BOARD(l) REMOVAL. 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove 1 screw(I) and then pull out the Bracket-pcb(22). 3. Disconnect the lead wire(CW 801,5P) from connector(CW 201) on the Amp P.C.Board (i). 4. Disconnect the connector(CN 803) from lead wire(CN 710,10P) on the Tone P.C.Board (c). 5. Disconnect the connector(CN 804) from lead wire(2P) on the Input P.C.Board(m). 6. Remove 28 screws(G,K) and then remove the Chassis-back(32). 7. Pull out the Pre out P.C.Board(l).
34
|
|
|
> |
|
