|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
AVR225
harman/kardon
AVR125/225 DISASSEMBLY PROCEDURE
<1> TOP-CABINET(21) REMOVAL 1. Remove 13 screws(S1,S7) and then remove the Top-cabinet. <2> FRONT PANEL ASS�Y REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the connect (BN72-Card canle)) on the FP PCB(37-1) from connector(CN72) on the Input PCB(39-1) 3. Disconnect the lead wire(BN80-8P) on the FP PCB(37-1) from connector(CN80) on the Main PCB(38). 4.Disconnect the lead wire(BN16-8P,BN10-4P) on the Tone PCB(37-3) from connector(CN16,CN10) on the Connect PCB(37-7). 5. Disconnect the lead wire(BN41-6P) on the Tone PCB(37-3) from connector(CN41) on the Video PCB(39-2). 6. Disconnect the lead wire(BN18-5P) on the Digital input PCB(37-8) from connector(CN18) on the Input PCB(39-1). 7. Disconnect the lead wire(BN81-6P,BN83-2P) on the FP PCB(37-1) from connector(CN81.CN83) on the Trans PCB(39-3). 8. Disconnect the lead wire(BN88-2P) on the Main PCB(38) from connector(CN88) on the Moms PCB(37-5). 9. Remove 1 screw(S10) and then lead wire(JW82-2P) on the Phone PCB(37-4). 10. Remove 9 screws(S1) and then remove the Front Panel ASS�Y. <3> TONE PCB(37-3) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Front Panel ASS�Y, referring to the previous step<2>. 3. Pull out the Volume Knob ASS�Y & 3 Rotary Knobs(5). 4. Remove 1 Nut(40), 1 Washer(41) 5. Remove 7 screws(S2) and then remove the Tone PCB(37-3). 6. Disconnect the lead wire(BN84-5P,BN90-2P) One the Tone PCB(37-3) from connector(CN84,CN90) on the FP PCB(37-1) 7. Disconnect the lead wire (BN87-6P) One the Tone PCB(37-3) from connector(CN87) on the Phone PCB(37-4) <4>PHONE PCB(37-4) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Front Panel ASS�Y, referring to the previous step<2>. 3. Disconnect the lead wire (BN87-6P) One the Tone PCB(37-3) from connector(CN87) on the Phone PCB(37-4) 4. Remove 2 screws(S2,S3) and then remove the Phone PCB(37-4) . <5>POWER LED PCB(37-6) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Front Panel ASS�Y, referring to the previous step<2>. 3. Remove 2 screws(S2) and then remove the Power led PCB(37-6). 4. Disconnect the lead wire(BN88-4P) from connector(CN88) on the FP PCB(37-1). <6>FRONT PCB(37-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Front Panel ASS�Y, referring to the previous step<2>. 3. Remove the Tone PCB(37-3), referring to the previous step<3>. 4. Remove the Phone PCB(37-4), referring to the previous step<4>. 5. Remove the Power led PCB(37-6), referring to the previous step<5>. 6. Remove 6 screws(S2) and then remove the Front PCB(37-1)
18
|
|
|
> |
|
