|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
;
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
CONTROLS AND FUNCTIONS
BassPro II has controls and indicators that help simplify sonic integration with almost any vehicle�s unique acoustic properties. These controls are located on the amplifier panel, as shown in Figure 10. Power LED Gain Control Crossover Remote Bass Control Auto Turn-On POWER LED: This indicator will glow red when the BassPro II is operating. GAIN CONTROL: Use this control to adjust the relative volume (loudness) of BassPro II with the other speakers in the vehicle. CROSSOVER: Use this control to adjust the amount of high-frequency information present in BassPro II�s output. A lower value signifies less highfrequency content. AUTO TURN-ON: For speakerlevel connections, used this switch to activate (or deactivate) BassPro II�s automatic turn-on circuit. For most speaker-level applications, slide the switch to the AUTO position. If you prefer to use the remote (REM) connection, slide the switch to the OFF position. REMOTE BASS CONTROL: Use this RJ-11 jack to connect the supplied remote bass control. SETTING THE CONTROLS: 1. Make sure the head unit is off and VOLUME control is set to minimum. 2. On BassPro II�s amplifier panel, set the CROSSOVER to its maximum frequency of 120Hz, as shown in Figure 10. NOTE: If using the REMOTE BASS CONTROL, set GAIN to maximum and set the BASS CONTROL to the midpoint. 3. Turn the head unit ON and play a selection of your favorite music track that has substantial bass. 4. Adjust the CROSSOVER control counterclockwise, until you hear only low-frequency information. Example � you should not hear vocals coming from BassPro II when seated in the normal listening position. 5. Adjust the BASS CONTROL either clockwise or counterclockwise to suit your taste, and to avoid audible distortion. 6. If you elect not to install the Remote Bass Control, adjust the GAIN control to the maximum level that provides undistorted output from the BassPro II, with the head unit�s volume control at its 3 o�clock setting. NOTE: In most cases the above steps will provide you with satisfactory results. However, the actual process may require several readjustments of each control, since the settings will interact with one another. If necessary, consult your authorized JBL car audio dealer for help in tuning your system.
Figure 10.
6
|
|
|
> |
|
