|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good detail, all pages clear, exactly what I needed
;
Excellent service, and just what I needed to service my TU-7700. All pages of the manual are clear and easily readable.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
;
We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
;
We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
Figure A-21
Holding Tray Gears and Belt
6 Remove the (1) one-way gear shown in Figure A-21, callout 1.
Note
The one-way gear must be reassembled correctly. With the gear on the shaft, turn the gear clockwise. The shaft should move the belt. Turning the gear counter clockwise should result in no movement of the shaft and belt.
7 Remove the (1) E-clip from behind the first gear (see Figure
A-21, callout 2). 8 Remove the (2) gears shown in Figure A-21, callouts 3 and 4. 9 Slip the belt off the gears. Note Verify proper wire routing when reassembling.
Duplexer
A -25
|
|
|
> |
|
