DICK SMITH G1929
Owner's Manual

H99L0AD(EN).fm Page 10 Friday, August 26, 2005 7:37 PM

Channel Presetting Tuning of broadcast channels not already preset in the unit can be performed in two ways.
Automatic Channel Preset

Manual Channel Preset � Use the remote control for this procedure. 1) Press VCR, then MENU. 2) 3) 4) 5) Press K or L to select �INITIAL�, then press B. Press K or L to select �CH TUNING�, then press B. Press K or L to select �MANUAL�, then press B. Press K or L to select �POSITION�, then press B. �When a weak signal is received in Manual Tuning mode, you can change the background to solid blue or the static screen by pressing C.RESET. 6) Press the Number buttons, K or L to select your desired position number, then press B. �You can select position number 01-99. �If �ON� appears on the right side of �SKIP�, press K or L to point to �SKIP�. Then, press B to select �OFF�. �If you want to remove scrambled signals, press K or L repeatedly to point to �DECODER�. Then, press B to select �ON�. 7) Press K or L to select �CHANNEL�, then press B. 8) Press K or L to start scanning. �The unit�s tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV Screen. �You can select desired channel number by using the Number buttons. Press three digits to select the channel number. (To select channel 24, press �0� button first and then press �2� and �4�.) �If this is the channel you want, press B. 9) Press MENU to exit. Note: � To confirm that a channel has been added, press CH. (K/L).
MENU TIMER SET UP INITIAL INITIAL CH TUNING CLOCK LANGUAGE

� By �AUTOMATICALLY� tuning channels and placing them in sequential order in the unit�s memory i.e. the first channel found will be memorized into the unit�s channel position 1, the second channel found will be memorized into the unit�s channel position 2 and so on. � Execution of the �Automatic� channel presetting cancels all the preset channels. DO NOT use this feature if you intend to use some of the pre-tuned channels. Use the �Manual� channel presetting function to tune in the additional channels you require.
Manual Channel Preset

� Each channel is tuned manually and individually. Follow the steps laid out in the �Manual Channel Preset�. Automatic Channel Preset You can programme the tuner to scan only the channels that you can receive in your area. � Use the remote control for this procedure. 1) Turn on the TV and select the TV channel to the video channel on the TV. 2) Press VCR, then MENU. 3) Press K or L to select �INITIAL�, then press B. 4) Press K or L to select �CH TUNING�, then press B. 5) Press K or L to select �AUTO�, then press B. �The tuner scans and memorizes all the active channels in your area. After scanning, the tuner stops on the lowest memorized channel.
MENU TIMER SET UP INITIAL INITIAL CH TUNING CLOCK LANGUAGE

CH TUNING AUTO MANUAL MOVE MANUAL POSITION CHANNEL DECODER SKIP P08 008 [OFF] [OFF] CH TUNING AUTO MANUAL MOVE

scanning

To Select a Desired Channel

You can select a desired channel by using CH. (K/L), or directly pressing the Number buttons on the remote control. � Enter a channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0 and 6. If you only press 6, channel 6 will be selected after a brief delay. � You can only select channels 01�99.

10

EN