|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
Chapter 4 Demo Waveforms Demo 2: Data-to-Clock
Notice that the break-away in the late side window margin data (due to the errant pulses in the histogram) is causing a poor curve fit for the late portion of the plot. (The dashed line is the extrapolation). While the margin extrapolation algorithm assumes that the distribution is purely Gaussian, this is a case where it is clearly not. You may therefore wish to experiment with fitting or weighting the extrapolation more towards the �tails� of the distribution rather than the center of the distribution. Conversely, you may wish to ignore certain outliers which may be due to media defects, or other known abnormalities. The HP E1741A allows you to modify the data range over which the extrapolation is fitted, as shown next. 3 Click on the right marker, and while holding the left mouse button down, drag the marker on the late portion of the window margin curve to where the data portion of the curve starts to break away; about �3.5 (look at the y-axis, right marker readout at the bottom of the display). By modifying the default extrapolation values, you will be able to cause the extrapolation to ignore this break-away in the curve. 4 5 6 Select Window Margin>Extrapolation levels. Highlight the ��10� value for the extrapolation. Enter ��3.5� and click the OK button. This directs the software to use only error-rate data in the range of 10�1.5 to 10�3.5when generating the extrapolation curve.
4
Getting Started Guide
4-21
|
|
|
> |
|
