|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
� During copying, held rotating at a high speed. When copying is completed, rotates at a high speed for the specified time according to the temperature in the machine, then starts rotating at a low speed. 2 OFF timing � During warm-up, stops when M2 (drum) is turned off. � After completion of warm-up, not turned off until SW2 (sub power) is turned off. b FM2 (writing section cooling) 1 ON timing Turned on when M15 (polygon) is turned on. � During copying, held rotating at a high speed in sync with M2 (drum). � When not copying, held rotating at a low speed. 2 OFF timing Not turned off until SW2 (sub power) is turned off. c FM5 (cleaner cooling) 1 ON timing Turned on when SW2 (sub power) is turned on. � During coping, held rotating at a high speed. � When copying is completed, starts rotating at a low speed after a lapse of the specified time from turning off of M7 (paper exit). After this, switching between high- and low-speed operations takes place according to the temperature in the machine. 2 OFF timing Not turned off until SW2 (sub power) is turned off. d FM6 (paper exit/F), FM7 (paper exit/R), and FM8 (main cooling/2)
ENWW
1 ON timing At the start of copying, starts rotating at a constant speed. 2 OFF timing Turned off when M7 (paper exit) is turned on. e FM9 (scanner cooling) 1 ON timing Turned on when L1 (exposure lamp) is turned on. 2 OFF timing Turned off when L1 (exposure lamp) is turned off. f FM10 (ADU reverse motor cooling) 1 ON timing Starts rotating at a constant speed when M9 (ADU reverse) is turned on. OFF timing Turned off when M9 (ADU reverse) is turned off. g FM13 (power supply cooling) 1 ON timing Starts rotating at a constant speed when SW1 (main power) is turned on. 2 OFF timing Not turned off until SW1 (main power) is turned off. h Fan air flow MFP unit explanation Other kinds of control 119
|
|
|
> |
|
