|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
manual excelente completo , diagramas y esquemas bien presentados y buena calidad de imagen.
;
muy buen manual completo de buena calidad de impresion preciso y detallado , muy útil para la reparación.
;
The service manual is a good quality scan of the Panasonic NV-850, which is electrically identical to the Philips VR 6920, but mecanically just nearly.
;
The service manual is a good quality scan of the Blaupunkt RTV-404, which is electrically and mecanically identical to the Panasonic NV-830.
;
completo manual bien detallado y de buena calidad de impresion , se echa en falta los esquemas de placa y parte de algun diagrama.
Left Side Assemblies
Removal &
Exhaust Fan (FM1)
The Exhaust Fan is located on the left side of the printer, just above the High Voltage Power Supply PCA.
1 Unplug the fan connector from the DC Controller (Figure 6-7, callout 1) and
remove the cable from the (2) clips (Figure 6-7, callout 2). 2 Lift the fan out of its mounting, noting the position of the cabling (attaches to lower left outside of the fan body). NOTE Removal of the Card Cage provides easier access to the connector on the DC Controller PCA, especially when reconnecting (Figure 6-7, callout 1).
Figure 6-7
6fusfan 6fusfanwmf
Exhaust Fan To Reinstall: Make sure that the fan is installed in the correct direction (exhaust, not intake). The cables should be toward the outside.
6
Removal and Replacement 6-13
Replacement
|
|
|
> |
|
