|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
(TROUBLE 2) Oven does not at all even thought MOTOR and P.C.B program.
CONDITION CAUSE TEST PROCEDURE OR CORRECTION
No input can be programmed.
Defective tact switch key of P.C.B.
Test procedure tact switch key of P.C.B.
Some inputs can not be programmed.
Loose connection.
Connect them tightly.
Display shows a number or figure different from one touched.
Incorrect touch key.
Touch key again after closing.
Random programming when pressing other than touch keys.
Display fixes some figure and can not accept any input.
Set time does not count down when touched START.
Defective secondary switch or out of adjustment
Test procedure secondary switch.
Defective tact switch key of P.C.B.
Test procedure tact switch key of P.C.B.
Loose connection.
Test tact switch key of P.C.B.
H.M.MOTOR not operating.
¥ Loose PCB connector No. CN6 and H.M.M S/W1, S/W2 ¥ Loose Gear of H.M.MOTOR
¥ To Fasten PCB CN6. ¥ To check H.M.MOTOR S/W1, S/W2 ¥ To Adjust Gear of H.M.MOTOR
5-14
|
|
|
> |
|
