|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Watching VCR
- When connecting the Monitor to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white, Audio (R) -red). - Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adaptor to the VIDEO INPUT on the Monitor. - If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor. - If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the monitor. - Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If a 4:3 picture format is used; the fixed image may remain visible on the screen. - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor. Watching TV programmes - Turn the Plasma Display on and select the programme you want. Watching VCR 1. Use the INPUT SELECT button on the remote control to select AV (AV1 or AV2) or AV(EXP.) (AV1(EXP.) or AV2(EXP.)). - If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received. - If connected to S-VIDEO, select the S-Video external input source. 2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner�s manual)
DC IN (DC 12V)
ANT IN +75 �
AV(EXPANDED) INPUT
AV OUTPUT
REMOTE CONTROL
VIDEO
EXPANDED OUTPUT
R AUDIO L (MONO) VIDEO
R AUDIO L
< Back panel of the PDP Tuner >
S-VIDEO
OUT (R) AUDIO (L) IN VIDEO
< VCR >
Watching Cable TV
- After subscribing for a local cable TV station and installing a converter you can watch cable TV. - For further information of cable TV, contact the local cable TV station. In using connection 1 1. Select programme number in programme switch of cable box. 2. Match the Plasma Display programme with selected programme of cable box. 3. Select your desired programme with the remote control for cable box. In using connection 2 1. Use the INPUT SELECT button on the remote control and select AV (AV1 or AV2) or AV(EXP.) (AV1(EXP.) or AV2(EXP.)). 2. Tune to cable service provided channels using the cable box.
RF Cable
DC IN (DC 12V)
ANT IN +75 �
AV(EXPANDED) INPUT
AV OUTPUT
REMOTE CONTROL
VIDEO
EXPANDED OUTPUT
R AUDIO L (MONO) VIDEO
R AUDIO L
< Back panel of the PDP Tuner > 1 For cable TV 2
(R) AUDIO (L) TV VCR
VIDEO TV
(R) AUDIO (L)
VIDEO
RF
Cable
VCR
< Cable Box >
-7-
|
|
|
> |
|
