|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
5. Flex the center of the Palmrest Assembly to release the side-tabs. Disconnect the Keyboard Flex cable. The other two cables can remain in place, or disconnect to fully remove the Palmrest Assembly. 6. Remove the four Keyboard Screws (see Figure 33 for the location of the screws). Keyboard Screws F1320-60920 (qty 4)
Figure 33 - Keyboard Screws
7. Lift up the Keyboard � be sure to thread the Keyboard Flex Cable underneath the plastic of the Upper Chassis Case. 8. To remove the Keyboard further, the DC Power Supply Board must be removed. Pull up evenly on both tabs of the Power Board. See Figure 34.
CAUTION:
Applying uneven pressure when removing the Power Board may cause damage to the connector pins.
77
|
|
|
> |
|
