|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual included schematics layouts and alignment procedure, clear to read and magnify, extremely pleased with manual and owner manual . com's service
;
perfect, i am very satisfait for the réception of the sansui r-5l service manual, thank you very much
;
Thank you, this is a rare document. Few others have it, but they charge way more for a download.
Great deal (even if you have to wait a few hours to get it).
;
The purchased manual is an high quality scan of the original Philips paper-based Service Manual. I am very satisfied!
 ;
The purchased manual is an scan of the original Panasonic paper-based Service Manual. Unfortunately the contrast is not perfect, but I am satisfied anyway!
No SW_12VG
YES
No SW_FD(+)
YES
Is the VCC (14V) supplied to Q165 Collector?
YES
NO
Check D124 on SMPS Board and Replace
Is the VCC (FD+) supNO plied to Q163 Collector ?
YES
Check D121 on SMPS Board and Replace
Is there about 12.5V at NO ZD152 & Q165 Base?
YES
Check Q165 and Replace
Is there about 5.3V at R184 and Q153 Collector ?
YES
NO
Check Q163 and Replace
Is the VCC (33V) sup- NO plied to Q160 Emitor?
YES
Check D126 on SMPS Board and Replace
Is the VCC (5.3V) supplied to Q153 Emitor ?
YES
NO
Check 5.3VA on SMPS Board
Is there about 0V at NO Q160 Base?
YES
Check Q160 and Replace
Is there about 0V at Q153 Base ?
YES
NO
Check the �STANBY H� signal from µ-COM
Is there about 5.3V NO at Q166 Base?
YES
Check SW_5.3VA
Check Q153 and Replace
Check Q166 and Replace
No 1.8V
YES
No 1.25V
YES
Is the VCC (3.3V) supplied to Q159 NO Emitor And IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Is the VCC (2V) supplied NO to Q154 Emitor ?
YES
Check D155 and 2.5V power supply
Is there about 3V ~ 3.3V at Q159 Base and IC154 pin 3 ?
YES
NO
Check Q159 and Replace
Is there about 2V ~ 2.5V at Q154 Base and IC154 pin 4?
YES
NO
Check Q159 and Replace
Check IC154 and Replace
Is the VCC (3.3V) sup- NO plied IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Check IC154 and Replace 3-6
|
|
|
> |
|
