|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I BOUGHT A PAIR OF INFINITY VINTAGE SPEAKERS THAT REQUIRED TO BE REPAIRED AND THE ELECTRONIC TECHNICIAN ASKED ME FOR THE SERVICE MANUAL.
I TRIED TO GET IT AT THE MANUFACTURER'S SITE WITH NO SUCCESS, SO I STARTED TO LOOK FOR IT IN THE WEB FOR A LONG TIME, UNTIL I FOUND THE SERVICE MANUAL IN THIS EXCELLENT SITE "OWNER'S MANUAL.COM".
NOW I HAVE MY SPEAKERS WORKING AND ENJOYING THE MUSIC I LIKE.
THANKS TO "OWNER`S MANUAL.COM" I RECOMMEND THIS SITE TO EVERYONE.
;
Very quick response. Very good and accurate print quality of the scanned document.
 ;
The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
;
thanks you are the best.Very good detail, Quick service response. A useful service manual with all details.
No SW_12VG
YES
No SW_FD(+)
YES
Is the VCC (14V) supplied to Q165 Collector?
YES
NO
Check D124 on SMPS Board and Replace
Is the VCC (FD+) supNO plied to Q163 Collector ?
YES
Check D121 on SMPS Board and Replace
Is there about 12.5V at NO ZD152 & Q165 Base?
YES
Check Q165 and Replace
Is there about 5.3V at R184 and Q153 Collector ?
YES
NO
Check Q163 and Replace
Is the VCC (33V) sup- NO plied to Q160 Emitor?
YES
Check D126 on SMPS Board and Replace
Is the VCC (5.3V) supplied to Q153 Emitor ?
YES
NO
Check 5.3VA on SMPS Board
Is there about 0V at NO Q160 Base?
YES
Check Q160 and Replace
Is there about 0V at Q153 Base ?
YES
NO
Check the �STANBY H� signal from µ-COM
Is there about 5.3V NO at Q166 Base?
YES
Check SW_5.3VA
Check Q153 and Replace
Check Q166 and Replace
No 1.8V
YES
No 1.25V
YES
Is the VCC (3.3V) supplied to Q159 NO Emitor And IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Is the VCC (2V) supplied NO to Q154 Emitor ?
YES
Check D155 and 2.5V power supply
Is there about 3V ~ 3.3V at Q159 Base and IC154 pin 3 ?
YES
NO
Check Q159 and Replace
Is there about 2V ~ 2.5V at Q154 Base and IC154 pin 4?
YES
NO
Check Q159 and Replace
Check IC154 and Replace
Is the VCC (3.3V) sup- NO plied IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Check IC154 and Replace 3-6
|
|
|
> |
|
