|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
 ;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
 ;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Replace the nozzles of the oven burners
Oven burner To replace the gas oven nozzle, follow this procedure: � Check the table no.1 for diameter of nozzle; � Remove the oven removable base panel; � Remove the screw 1 on the oven burner � Remove the oven burner by pulling it forwards. � Replace the nozzle by means of a No 7 socket spanner; Reassemble the parts following the same procedure in reverse.
Grill burner To replace the gas grill nozzle, follow this procedure: � Remove the grill burner after removing the fixing screws. � Replace the nozzle by means of a No 7 socket spanner; � Refit all parts and test.
Adjustment of minimum level
Oven burner � Light the burner knob on position maximum and leave the oven door closed for about 10 min. � Turn the knob slowly to position minimum. � � Pull off the knob to adjust minimum flow. Unscrew or screw the by-pass screw (is it above of tap shaft) until a regular small flame is reached. � For LPG screw completely the by-pass screw. The flame shouldn�t extinguish when closing the oven door. Grill burner The grill temperature cannot be adjusted. To obtain a lower temperature or slower cooking time the grill pan must be lowered away from the flame. After completion of any repairs, conversion or adjustments, the statutory safety tests must be carried out.
by-pass
26
|
|
 |
> |
|