|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
 ;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
;
Wow very wonderful and clear!!!! I will always trust them
Technical Manual
TSS-Sat4000
EXPLODED VIEW
7 5 1 6 35
ITEM NO. 1. 2. 3.
DESCRIPTION Top/Bottom Large Plastic Cap Front Baffle Logo
QTY. 2 1 1 1 2 2 2 1 1 4 2 1 1 4 1 1 1 1 1 1 24 2 1 1 1 6 2 3 3 1 1 1 1 1 4
PART NO. FE-80312-02 FA-80313-02 AL-80305-01 FL-80313-01 BP1-80312-02 BP2-80312-03 SR-1006-18 NT-80313-01 400-TW 400-350DS 080M30001 SP-80313-01 SP-80313-02 PK-1019-01 SP-80313-05 SP-80313-03 SP-80313-04 SB-80313-01 PK-1021-02 HW-4001-01 SR-2104-07 SR-0535-10 ST-0307-01 SR-0306-28 SR-0206-18 SR-0306-22 SR-0206-25 GA-1014-01 SN-0009-01 FE-TSS4000-01 PO-080B31301-01 PO-080B31201-01 400-CTSAT 400-OMSAT SR-0304-18
2
9 22
21
10
13
4. Crossover Network 5. Top/Bottom Small Plastic Cap 6. Top/Bottom Plastic Wall Mount Cap w/Slot 7. Cap Screw 8. Front Grille 9. Tweeter 10. Woofer 11. Midrange 12. Wall Mount Bracket Cover 13. Wall Mount Bracket 14. Gasket, Wall Bracket 15. Small Stand/Collar 16. Middle Stand/Collar 17. Large Stand/Collar 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Table Stand Plate Gasket, Table Stand Plate Allen Wrench Woofer Screws Tweeter Screws Tapered Pin for Stands Flat-Head Phillips Screw 1/4-20 x 1-1/4" Pan-Head Phillips Screw 1/4-20 x 3/4" Flat-Head Phillips Screws 1/4-20 x 7/8" Pan-Head Phillips Screws 1/4-20 x 1" 1/4-20 Flat Washers 1/4-20 Nuts Stand Top Assembly Styrofoam for TSS-4000 Sat Accessories (2 pc. set)
12
11
14
6 8
5 3 1 23 7 30 28 27 25 26
4
17 16
15
32. EPE for TSS-4000 Sat (3 pc. set) 33. Outer Carton 34. Owner's Manual 35. Wall Mount Bracket Screws M4*18 Optional Accessories FMK-4000PLT Flush-Mount Kit (Platinum) FMK-4000CHR Flush-Mount Kit (Charcoal) TS-STAND4000PLT Floor Stand (Platinum) TS-STAND4000CHR Floor Stand (Charcoal)
18 26 19 29
24
TO SERVICE THE TSS-SAT4000 1. To remove grille easily, first remove one or both end caps. The pull the grille off from one end. 2. To remove front baffle, work a tool such as a small screwdriver into an opening on one of the top or bottom edges of the front baffle (see image); after end section is separated from the enclosure, slowly work entire front baffle away from its slot(s) in the enclosure. 3. Carefully lift the front baffle, with tweeter attached, off the enclosure. 4. If necessary, remove the Phillips screws holding each woofer/midrange to the enclosure.
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
5/05
TSS-Sat4000
|
|
|
> |
|
