|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
;
So usefull to make my installation a breeze. 5 stars on quality.
;
very helpful, the information in these manuels are very detailed
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Section 2
Setup and Applications
1074
2.1 Basic Connection of the 1074
� Turn off all equipment before making any connections. � Install the 1074 in your rack with the provided rack screws. It is essential that when the 1074 is being mounted in a rack mounting enclosure, the unit should be positioned with enough room (at least 1U of space above the unit and 1U of space at the below the unit) to allow proper ventilation. The 1074 should not be mounted above or below anything that generates excessive heat. Ambient temperatures should not exceed 1130F (450C) when equipment is in use. Although the unit is shielded against radio frequency and electromagnetic interference, extremely high fields of RF and EMI should be avoided where possible. � Make audio connections via XLR plugs. For input and output connections, use the XLR balanced or unbalanced connections. For Key input applications, use 1/4� TRS balanced or unbalanced connections. � Apply power to the 1074. Connect the AC power cord to the AC power receptacle on the back of the unit. Route the AC power cord to a convenient power outlet away from audio lines. The unit may be turned on and off from the rear panel power switch or from a master equipment power switch.
2.2 Suggested Applications
1). Gating Dry and Percussive sounds such as snare Drum and Kick Drum. 2). Gating sounds that have longer decay times such as cymbals and Pianos 3). Gating Hum or Buzz from live instruments or recorded tracks. 4). Eliminating Headphone leakage into microphones. 5). Gating instrument microphones to eliminate amplifier bleed. 6). Adding Dynamics to a track or mic�d instrument. 7). Suppress feedback by gating microphones. 8). Control gating action by an external signal at the Key Input on the rear panel. 9). �Tighten Up� a room by gating out undesired ambience.
®
4
31074 User Manual
|
|
|
> |
|
