|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
AFC Adjustment: For TVs not including � L/L� � Standarts: � Switched the system to the desired standard, � Apply the IF signal to the IF inputs in accordance with the standards (38.9MHz for � B/G � and � D/K �, 39.5MHz for � I � ) at pin1 and 2 of SAW filter (Z101) � Adjust the VL101 until getting 2.5 Vdc at pin9 of the microcontroller (IC501). For TVs including � L/L� � Standarts: � Switched the system to a desired standard, � Apply the IF signal to the IF inputs in accordance with the standards (38.9MHz for � B/G � and � D/K �, 39.5MHz for � I � ) at pin1 and 2 of SAW filter (Z101), � Adjust the VL101 until getting 2.5 V dc at pin9 of the microcontroller (IC501), � Switched the system to the standard � L �, � Apply the IF signal to the IF inputs in accordance with the standards (33.9MHz for � L �) at pin1 and 2 of SAW filter (Z101), � Adjust the VC101 until getting 2.5 Vdc at pin9 of the microcontroller (IC501).
10
|
|
|
> |
|
