|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
;
Excellent copy that was delivered within 12 hours and solved my problem.
 ;
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
;
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
3.
RECORD
Programme a recording
button to select the programme number The set needs the following information for every programmed recording: * the date on which the recording is to be made * the programme number for the TV channel * the start and end time of the recording The set stores all the information mentioned above in what is known as a TIMER block. It can store 6 TIMER blocks for up to one month in advance.
1 Insert a cassette. 2 Use the
Pp
from which you wish to record, e.g.: �P 01� .
3 Press the RECORD n button. 4 Use the
STOP h
button to stop the recording.
5 If, whilst recording, you want to switch off the TV screen,
press the STANDBY m button once. To switch the TV screen on again, press the button.
Pp
Important notes for recoding
� OTR: If you do not want to record to the end of the cassette, press the RECORD n button again. The display shows at what time the recording will stop. With the D or the C button you can change the end time of the recording in 30 minute intervals. If you wish to cancel the end time, press the CLEAR b button.The recording goes on uninterruptedly. (This does not effect the recording.) Programme number �E1� is provided for recording from external sources (via the EXTERNAL scart socket). Erase protection: So that you don�t accidentally delete an important recording, you can remove the special tab (erase protection) on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want the cassette to be erase protected, you can seal the gap again with adhesive tape or slide the special tab to the right. Auto-assembling: You can use the auto-assembling function to join individual recordings without any major picture disturbance between the recordings. Search for the correct position on the tape and then stop the playback by pressing the STOP h button. �PAUSE� appears in the display. Now start recording as usual by pressing the RECORD n button. Long play: Before recording, press the MENU button. Select and confirm the �SPECIAL� line. Select and confirm the �TAPE SPEED� line. Select the �LP� (=LongPlay) recording speed and stop by pressing the MENU button. During playback the TV Combi will automatically select the correct playback speed.
How to enter, check or clear a TIMER block manually
1 Press the
TIMER k
button.
2 Select a free TIMER block or the TIMER block you want
to check or clear.
3 Clear: Press the
CLEAR b D
� �
button.
4 Enter/Check: Press the
or C button to switch between �DATE� (date), �DW� (daily, weekly), �PR� (programme number), �START� (start time) and �END� (end time). Press the A and the change the data.
B
, or the
0-9
buttons to
�
5 To end programming, press the 6 Press the
STANDBY m
MENU
button.
button.
�
6
|
|
|
> |
|
