PHILIPS 14PV227/07
Owner's Manual

Manual TV channel search
In certain cases the �Automatic TV channel search� may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main

Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT .
a To do this, select the channel number �E1� using the

menu will appear.
b Select the line �MANUAL SEARCH� with the =P r or
;P q

button 0 on the remote control. You will have to select the channels to be received by the satellite receiver on the receiver itself.
b Use the number buttons 0..9 on the remote control to

button and confirm with the

SqP

button.

select the channels on the TV-Video Combi.

MANUAL SEARCH

PROGRAMME NUMBER FREQUENCY DECODER

W P01

X

754 OFF

EXIT: MENU

STORE: OK

c In the line �PROGRAMME NUMBER�, select the function

with the buttons QSr or SqP or use the number buttons � 0..9 � on the remote control to select the desired programme number, e.g.: �P01�.
d Select the line �FREQUENCY� with the menu buttons
=P r

or

;P q

.

e Enter the frequency of the desired TV channel with the

number buttons

0..9

.

D If you don�t know the frequency of the desired TV channel, press SqP in line �FREQUENCY� to start the automatic search. Repeat automatic search until you have found the desired TV channel. A changing frequency number will appear on the TV screen.
f If you want to allocate a decoder, in line �DECODER�

select �ON� using the button

SqP

.

g To store the TV channel, press OK . �STORED� will

briefly appear on the TV screen. D If you would like to search for more TV channels, start again at step b.
h To end, press the MENU button.

7