|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
20R-S100S
FEATURE
SERVICE POSITION M01 M02 M03 M04 M05 ADJUST ITEM MS LEVEL MTS-VCO FILTER LOW SEPARATION HIGH SEPARATION DATA
RANGE INITIAL VALUE
ADJUSTMENT CONTENTS
00-0F 00-3F 00-3F 00-3F 00-3F
0A 20 1C 20 1B
Note: Refer to the SERVICE ADJUSTMENT for each corresponding values. Table - D
Holding down both the Vol-up/Ch-down buttons on the TV set at service mode for more than 2 seconds will automatically write the above initial values into IC2102 (IC2101).
ADJUSTMENT PART REPLACED IC2001 IC201 NECESSARY UNNECESSARY NOTES Data is stored in IC2102 (IC2101). The adjustment is needed to compensate for characteristics of parts including IC201. Holding down both the Vol-up/Ch-down buttons on the TV set in the service mode for more than 2 seconds will automatically write the above initial values into IC2102 (IC2101). Adjust items related to picture tube only.
X X
IC2102 (IC2101)
X
CRT
X
Table - E
R2101 If using IC2101 If using IC2102
R2102
R2103 �
R2104 �
�
�
Table - F
8
|
|
|
> |
|
