|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (AV1 in and AV2 out). The AV1 in socket has audio and video inputs. The AV2 out socket has audio and video outputs.
Video recorder
& Connect the TV�s yellow and white (AV1 in) jacks to the corresponding Video and Audio jacks on the player. é Connect the TV�s white AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player. Match the cable colour to the jacks� colour. The white jack is the Left (Mono) audio channel. � Turn on the TV and VCR player. Set the TV to AV1.You can now play your video cassette tape. Connection is also possible via the aerial cable. You will therefore need to tune in your video recorder�s test signal and assign a channel number 0. Select channel 0 to playback.
Side connections
Audio-Video connections
& Connect the TV�s yellow and white jacks to the corresponding Video and Audio jacks on the equipment. é Connect the TV�s white AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player. Match the cable colour to the jacks� colour. The white jack is the Left (Mono) audio channel. � Turn on the player. Set the TV to FRONT. You can now play your equipment.
Headphone connections
When headphones are connected, the sound on the TV set will be cut. The VOL + or � keys are used to adjust the volume level. The headphone impedance must be between 32 and600 Ohms.
10
Operating manual-21PT2324
Peripherals
p10_21PT2324
10
04/20/04, 9:13 AM
|
|
|
> |
|
