|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
3 Select �SLEEPTIMER� line. 4 With the
D
Manual channel search
button you can determine In certain cases the Automatic channel search may not be able to find all of the TV channels (e.g.: coded TV channels). You can then use this manual method to set the channels.
1 Switch on the set with the
STOP h button. Press C simultaneously.
or the
C
the minutes left until switch off in 15 minutes intervals. When you set the time to �0� with the CLEAR button the sleep function is switched off.
5 Press the
MENU
button.
the
menu buttons
D
and
Switch set on function
You can programme your set to switch on at a predetermined time.
1 Press the
MENU
2 Select and confirm the �MANUAL STORE� line.
MANUAL STORE CHANNEL/FREQ. SEARCH FINE TUNING PROGRAMME NR. DECODER STORE
vw C-21 1
button.
2 Select and confirm the �FEATURES� line. 3 Select and confirm the �ON TIMER� line. 4 Determine the time you wish the set to switch on. 5 Select the �WAKE UP� line and switch the �on-timer� on or 3 Select the �SEARCH� line. 4 Press the
button as often as necessary, until you have found the right TV channel.
C
off.
6 Press the 7 Press the
MENU
button. button.
Note: * If you want to allocate a decoder, switch the decoder function on or off with the D or C button in the �DECODER� line. * If you want to change the automatic channel setting, select the �FINE TUNING� line. With the D or C button you can vary the automatic TV channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
STANDBY m
Child lock
1 Press the
MENU
button.
2 Select and confirm the �FEATURES� line. 3 Select the �CHILD LOCK� line. 4 Switch the child lock on or off. 5 Press the
MENU
5 In the �PROGRAMME NR.� line use the
button to select the required programme number, e.g.: �P 01� .
Pp
6 Select and confirm the �STORE� line. 7 If you want to search for further TV channels, start again
button.
Note: If a button is pressed with the childlock �on�, �CHILD LOCK� appears for a few seconds in the display. * Programmed recordings are made despite the child lock and cannot be interrupted.
at step 4. To finish, press the
MENU
button twice.
9
|
|
|
> |
|
