PHILIPS 21PV908/07
Owner's Manual

Automatic search for a tape position (index search)
At the start of each recording, the TV-VIDEO Combi will write an index code on the tape.
a Press the INDEX E button. Press the I button to

e Confirm with the OK button. f To end, press the MENU button.

D Please note, however, that interference may still occur with poor quality cassettes.

Cleaning the video heads
If horizontal lines appear on the screen when you play a cassette, you should clean the video heads.

select the next code mark or the previous code mark.

H

button for the

b When the TV-VIDEO Combi finds the code mark, it will

automatically switch to play.

Picture interference
When the picture quality is poor when you play a cassette, please follow these instructions.

Tracking during playback
a During playback, press the MENU button. b Select the line �Tape� with the buttons B or A and a During playback, press the MENU button. b Select the line �Tape� with the menu buttons B or
A

confirm with the

C

button.

c Select the line �Tracking� with the buttons B or
A

and confirm with the

C

button.

.

c Select the line �Cleaning� with the menu buttons
B

d Hold the buttons D or C until the playback quality is

or

A

.

at its best.
e Confirm with the OK button. f To end, press the MENU button. This setting will remain

d Press the OK button. �CLEANING� appears on the

screen.
e Wait a few seconds, until the message disappears and

then press the

until you remove the cassette.

MENU

button.

Tracking during still picture
If the still picture vibrates vertically, you can improve the still picture as follows:
a During still picture, press the MENU button. b Select the line �Tape� with the B button or A and

confirm with the

C

button.

c Select the line �Jitter� with the B or A button. d Hold the D or C button until the picture quality is at

its best.

18